| Electromotors Dublin - Ireland |
Tel : 353 - 1 - 830 9155 Fax : 353 - 1 - 830 9270 |
| Functional Descriptions (By Parameter No.) |
| V/F CURVE (Parameter No. 04) |
Used to select either the constant or square low torque mode.
(Constant (Square low
torque mode) torque mode)
| Data sett- ing value |
Name | Remarks |
| 0 | Constant torque mode | For machine applications |
| 1 | Square low torque mode | For fan and pump applications |
Note) The relationship of the output voltage to frequency is applied only during the V/F control (when parameter No. 65 is set to 0). The relationship is not applied during vector control (when parameter No. 65 is set to 1).