Body

Electromotors

Dublin - Ireland

Tel : 353 - 1 - 830 9155

Fax : 353 - 1 - 830 9270

Functional Descriptions (By Parameter No.)

JOG FREQUENCY, JOG ACCELERATION TIME, JOG DECELERATION TIME (Parameter Nos. 27, 28 & 29)

A range of 0.2Hz to 20HZ can be set in 0.01Hz increments.

This function is handy for positioning.

(Parameter No. 27 : Jog frequency setting)

Data setting range (Hz)

0.2 ~ 20 (0.01Hz increments

(Parameter No. 28 : Jog acceleration time setting)

(Parameter No. 29 : Jog deceleration time setting)

Data setting range (sec.)

0.04 . 0.1 ~ 1600 (The indication for 0.04 sec. is "0000")

(Local jog operation)

Parameter No. 08 must be set to 0.
Press the SHIFT button unit "LJ." is indicated on the Mode Display.
The motor will jog while the forward start of reverse start button is held down.

(External jog operation)

Parameter No. 08 must be set to 1 to 6.
The jog function must be selected in parameter No. 20.
Close the control circuit terminals Nos. 6 to 16, and "EJ." will display on the Mode Display.

Use control terminals 10, 11 and 12 to start or stop jogging and to run in the forward or reverse directions.